10 Hot Tub Installation Tips

Looking for 10 hot tub installation tips? Purchasing a new hot tub is one of the best ways to up the value of your personal bachelor pad, but the procedure needs to be handled with caution. Hot tub installations require careful planning, otherwise you risk damaging your property, having to correct your installation or possibly putting your life at risk. Use these 10 hot tub installation tips as a primer to getting it done perfectly the first time.

1. Avoid electrical fire risks. Your hot tub’s installation, whether indoors or outside, must be no less than ten feet from overhead power lines and other electrical hazards. It goes without saying that water and electricity are dangerous, even lethal, when combined.
2. Ensure your location is within legal guidelines. Local city and state guidelines vary, but you must be sure to keep your hot tub within the parameters of your local jurisdiction. Most guidelines ensure that you have enough space for the installation, plumbing and maintenance access as needed.
3. Ground hot tub installations using concrete pads for bases are said to be ideal. They usually are characterized as providing stability in the long term.
4. Decked hot tub installations using raised platforms are the most aesthetically pleasing. They can pump up the natural beauty of your hot tub or spa. They also help prevent moisture buildup around the base, which, if left untreated, can cause mildew and wood decay, ruining your investment.
5. Remember that no matter what type of installation you use for your hot tub or spa, you must provide a level surface for installation. A level surface free of sharp stones and debris that can puncture and damage your hot tub can provide the most effective performance for your hot tub.
6. Consider hiring a professional. Even though home improvement stores offer seminars on installations, you might find it best to save all the hard and complicated labor and wiring for a licensed and trained professional hot tub installation company. You want to get your hot tub installed right the first time, and not be overrun with having to drain expensive gallons of water and hot tub cleaner and pay for a re-installation because it wasn’t done right the first time and your tub is non-compliant.
7. Follow all manufacturer’s instructions for your hot tub. This will minimize the likelihood of errors that would make the installation non-compliant and require the entire project to be redone.
8. Research additional supplies and materials that would be required for your hot tub’s installation at additional expense to you. Don’t wait until you’re in the middle of an installation to recognize that you don’t have a required part because you assumed it came with your purchase.
9. Research hot tub cleaners and employ a preliminary cleaning routine to follow after your hot tub installation is complete. You might adjust this as needed on an ongoing basis for the best care and maintenance.
10. Watch video installations online to get a better idea of what to expect for your hot tub installation. Knowing what to expect can minimize the possibility of unexpected events when it’s time to install your hot tub.