Looking for five skiing tips, carving being near the top of the list? When ski carving, you are turning on the edge of your skis. This can be difficult to do correctly, but the tips below will help you out some.
- Track check. Performing a track check is one of the five ski carving tips. When you are practicing ski carving on flat terrain, you want to check the tracks that you are leaving in the snow. If all is well, the snow should be smooth. If you are skidding when turning, you should be able to tell where in the turn the skid is occurring.
- Linking turns. You will want to practice ski carving on flat terrain. Start off slowly by practicing a 1/4 turn and then progress onto a 1/2 turn. Linking turns, one of the five skiing carving tips, means that once you have those smaller turns perfected, you will want to link them together to complete a full turn.
- Cross over. One of the most important five skiing carving tips is a positive cross over. The cross over occurs when your body has to move across the skis to tilt the skis onto their new edge. To achieve a positive cross over, you will want to make sure that your hips are moving up and across while you turn.
- Leg lean. By increasing the lean of your legs, you will also be helping your cross over. To increase your leg lean, one of the five ski carving tips, you should begin to think about softening your legs the moment you begin to move your hips. If you can also soften the stance of your inside leg, you will achieve a greater degree of flexion with no restrictions, which will help you carve.
- Thigh steering. The final tip on the list of five ski carving tips deals with thigh steering. Most people will steer with their feet when carving. This works for some, but as you pick up speed, you will want to begin steering with your thighs. Using your thighs as your main steering mechanism will give you a more powerful, solid steering feel.