How To Change A Flat Tire
Are you ready to learn how to change a flat tire? Learning how to change a car tire is very easy to do if you have the right tools to complete the task. In fact, you can get the job done without even getting dirty. Think about your safety as you complete the process. Keep on reading to learn how to change a flat tire.
To learn how to change a flat tire, you will need:
- Spare Tire
- Car Jack
- Tire Iron
- Brick or Block
- Make sure that the car is in the park position to help you learn how to change a flat tire. Place the block or brick behind the wheel adjacent to the flat tire to keep the car from rolling or moving while you are trying to change the tire. Use you tire iron to loosen the bolts on the flat tire.
- Put the car jack under the bottom base of the car by the flat tire to help you learn how to change a flat tire. Read the instructions on your car jack. Slowly jack the car up and finish removing the bolts when the flat tire is off the ground. Place the bolts where you can find them and remove the flat tire.
- Insert the spare tire onto the wheel studs to help you learn how to change a flat tire. Screw the bolts back onto the wheel studs. Do not tighten the bolts too tight. Use the car jack to release and let the spare tire hit the ground slowly. Tighten the bolts with the tire iron and make sure they are tight. Drive the car to find out how the tire feels and if all is OK, you have completed the process.
Wear gloves just in case bolts are very tight.
Try not to work alone just in case an accident occurs.
Avoid changing a tire at night if you cannot put on the flashers.
A pressure power tool can remove bolts in seconds.