If you enjoy using your laptop, you have most likely wondered how to connect a laptop to a home stereo system. There are many benefits to combining the use of both items. The result is that you can enjoy your favorite songs on your high-quality home stereo system, and it only takes a few minutes to set up.
- Use a Y-adaptor cable. This cable has two RCA-type plugs, red and white, on one end. On the other end, you will find a 1/8-inch plug. You can generally find this type of cable at most computer stores.
- Plug the RCA plugs into your stereo system. The plugs are color-coded. Check to see if there are any empty slots on the back of your home stereo. Plug each plug into the corresponding slots.
- Locate the headphone jack on the laptop. Plug in the other end of the cable. Turn on the volume and play your favorite tune to make sure that it’s working properly.
- Use a wireless system. If you don’t want a wire or cable running across the room to your stereo, consider a wireless device. There’s a hardware device on the market which allows you to connect your laptop to your stereo. You simply place the device near your home stereo and plug it in to the back of the stereo system. Music signals travel from the laptop through the wireless device and to your stereo.
Connecting your laptop to your home stereo is simpler than it sounds. Simply take a quick trip to your local electronics store, and you will have all you need to enjoy music from you laptop on your home stereo.
What Others Are Reading Right Now.
How to End Awkward Handshakes
A short illustrated history of when to use what.
14 Things to Look Forward to in Your 40s
The door is wide open to say and do anything you want. Such as the following...
The Modern Gentleman’s Guide to Casual Sex
Studies show your fling has an assumption about how things will go. Prove them wrong.