How Do I Fix My 1999 Ski Doo Mxz 500

It is good to be handy with knowledge as to how to fix or repair your Ski Doo Mxz 500 and it may come useful in dire circumstances where you are trapped in inaccessible and remote areas and also to save yourself some good amount of dollars.

To fix your 1999 Ski Doo Mxz 500, you shall need:

  • New plugs
  • Tether switch or kill switch
  • Gaskets
  • Ski Doo service and repair manual
  1. If the Ski Doo shuts off while riding, change the plugs and clean up the carburetor.  If this does not work, it is time to change the kill switch.
  2. Replace the snowmobile belt when there are indications of cracks, peeling, or crumbling.  Other signs of a worn out snowmobile belt are if you're not getting enough acceleration or if you notice a sqealing noise.
  3. If the Ski Doo does not start after cleaning the carburetor whereas earlier it was, install new gaskets to take care of air leaks.
  4. Replace both shocks and some other suspension parts to smoothen the ride on your snowmobile 1999 Ski Doo Mxz 500.
  5. Acceleration difficulties can additionally be remedied by simply changing the secondary coil.
  6. Change the Cdi to regain the lost spark of the 1999 Ski Doo Mxz 500.
  7. Look into your downloaded copy of the fully indexed 1999 Ski Doo Mxz 500 service and repair manual for any specific problem that you may have relating to your 1999 Ski Doo Mxz 500. This manual contains various detailed maintenance and repairs procedure for your 1999 Ski Doo Mxz 500 from the front bumper to the rear and will save you hundreds of dollars on repairs by doing it yourself instead of visiting the dealer or repair station.
  8. A useful tip is to do routine maintenance of your 1999 Ski Doo Mxz 500 like oiling, tuning and servicing brakes regularly. This will not only reduce the occurrence of any major technical snag in your snowmobile, but also go a long way in ensuring smooth functioning of your Ski Doo in the much awaited snow and winter season.
show comments

What Others Are Reading Right Now.