How To Fit A Snow Board

Learning about how to fit a snowboard requires more than just your size. Check out the tips below to learn how to fit a snowboard. Experts say that in fitting a snowboard, you should consider the following factors equally. Of course, one factor might be more important to you if for example, you only have 150 dollars to spend on a snowboard, or if you are a beginner and you just want a snowboard that isn't a rental. Check out these strategies on fitting a snowboard:

1. Decide how much money you want to spend. In fitting a snowboard, you are going to eliminate certain choices right away if you are on a budget. Additionally, how much you want to spend will determine where you buy your snowboard and what brands to look at. If you are not on a budget, you could have a custom snowboard made for your specifications and desired graphics. You can get a very decent board for around 300 dollars, especially if you buy it during the off season. If you are going to get a discount snowboard, you should look for a quality brand on sale (Burton, Arbor, Volcom).
   
2. Consider your riding style. Fitting a snowboard depends more on what kind of boarding you are doing than your physical size. If you plan to spend the majority of your time in the snowpark, doing turns and jumps, you will need a freestyle snowboard. These boards have the most flex, which makes maneuvering easier. If you are going down runs on the mountain, you will need an all-mountain (or all-terrain) snowboard. Most people fall under this category.  If you are boarding through difficult terrain, an alpine (or freeride) snowboard will be best suited for these adventures. The boards tend to be longer and stiffer for carving through powder.
3. Consider your experience level. If you are a more advanced snowboarder, you know what you like and dislike about fitting snowboards. This is where the board specifications really matter. If you tend to land hard when you are doing tricks, for example, you might benefit from a higher end board with a "triaxial" pattern, which doesn't wipe out as easily. If you are a beginner, you will probably not even notice the difference.