Need to know how to install a Alpine IVA-D300 in a 2004 Toyota 4Runner? If the Alpine radio did not come with instructions you will be completely lost. So if you have decided to look online for a guide on how to install your Alpine IVA-D300 on your Toyota 4Runner, congratulations, you have found that guide!
To to install a Alpine IVA-D300 in a 2004 Toyota 4Runner you will need:
- Wire cutter
- Flat Head Screw Driver
The first step to installing an Alpine IVA-D300 on your 2004 Toyota 4Runner is to open up the hood and disconnect the battery.
- After you have done that use your wedge and slowly wedge the stock radio out. Make sure you remove any CDs before taking the stock radio out. Once the radio is wedged out disconnect the radio. This is done by using your wire cutters and cutting the wire. Do not cut all of it off or you will not have enough wire to connect the Alpine radio.
- The next step to installing an Alpine IVA-D300 on your 2004 Toyota 4Runner is connect the wires to your Alpine IVA-D300.
- After you have done that, carefully insert the Alpine IVA-D300.
- Once you have done that, reconnect the battery. Turn on the radio to make sure all the speakers are working and everything is functional. If you do not hear sound from your speakers check the wiring. If your old radio was not working in the first place. If the radio does not turn on check the fuse box. If the radio still does not work then there is a chance that your Alpine radio is broken.