How To Install Car Speakers In Elantra

Finally saved up for new speakers and now you need to learn how to install car speakers in your Elantra to save some money? Don't worry about it, that's why this guide was created. All you need to do is gather some materials and set aside about an hour of your day.

To install car speakers in an Elantra, you will need:

  • Speakers (Make sure they are the same size as the one you are replacing or else the speakers will not fit in the speaker slots.)
  • Wire cutter
  • Screw driver
  1. Now that you have those materials, let's get started on installing car speakers in your Elantra. Open up the hood of your Elantra and disconnect the battery.
  2. Get your screwdriver and unscrew the door panels. After you have done that, unscrew the speakers and disconnect them.
  3. The third step to installing car speakers in your Elantra is to connect the wires to your new speakers. Screw the speakers in. Reconnect your car battery and turn on the radio. If the speakers work, screw back on the door panels. If they do not work, check the wiring and make sure that none of the fuses are blown out. If your speakers still do not work you have to rewire your whole system. This is done by heading over to your nearest electronic store to buy new speaker wire. Follow the existing wire through the door panels and replace them.  Once you have replaced them, then your speakers should work. Congratulations, you now know how to install car speakers in your Elantra!
show comments

What Others Are Reading Right Now.