How To Install Care Stereo For 2008 Dodge Charger

Do you need to learn how to install a car stereo your 2008 Dodge Charger? It is understandable to want more audio power while you're cruising around town in your hot set of wheels, and after you've selected your dream sound system, maybe you don't have the money to have it installed professionally.   Luckily, the process is simple and the materials readily available at an electronics store.  You'll be bumping your favorite tunes in no time.

The materials needed are:

  • head unit 
  • speakers
  • screwdriver
  • wire cutter
  • sedge
  1. Disconnect your car battery. After you have done that head inside your car and pop off the car stereo speaker covers.
  2. Unscrew the speakers. After you have done that slowly pull them out and cut the wire. Do not pull the wire out of the speakers.
  3. Connect the wires to your new speakers and screw them in. Pop the car stereo speaker covers back on. Now use your wedge and slowly wedge the head unit out. After you have done that cut the wires. Reconnect the wires with your new head unit and reconnect your battery. Now you have successfully installed a car stereo for your 2008 Dodge Charger.

Tips: When buying stereo speakers and a head unit make sure they are the same size as the ones in your Dodge Charger. You can find out the size by measuring them or looking up the size online. You want the same size stereo speakers and head unit so you do not have to make modifications to your Dodge Charger.

show comments

What Others Are Reading Right Now.