How To Install Eclipse Deck Into 1998 Land Rover Discovery

Need to learn how to install your Eclipse Deck into your 1998 Land Rover Discovery? Maybe you lost the instructions that came with it or maybe you just don't understand them. Whatever the case maybe here is a guide that will explain how to install your Eclipse Deck into your 1998 Land Rover Discovery. Before you get started you are going to need some materials. The materials needed are:

  • Dash Kit
  • Wire cutter
  • Wedge
  • ½ inch wrench
  1. If you are replacing a broken radio move on to step two since this step does not apply to you. Before installing your Eclipse Deck into your 1998 Land Rover Discovery make sure to eject any CDs from the radio you have in it now and write down your favorite radio stations.
  2. After you have done that take your ½ inch wrench and unbolt the nuts on the bracket that is connecting the battery to your car. Once you have done that take your wedge and slowly wedge the radio out.
  3. Then cut all the wires that are connected to the back of the radio. Once you have done that put that radio to the side and reconnect all the wires to your Eclipse Deck. The wires are color coded so if you are color blind you are going to need some help on this step.
  4. The final step to installing your Eclipse Deck in your 1998 Land Rover Discovery is to slowly insert the radio into the dash kit. Once you have done that reconnect the battery and congratulations you are done.
show comments

What Others Are Reading Right Now.