How To Install A Pioneer DED P3800MP
So, your new Pioneer DED P3800MP finally came in the mail and you're totally excited to install it, though you have one problem: you have no idea how to install a Pionneer DED P3800MP. Don't worry, we created this guide for our readers. Before getting started, you are going to need some materials to install your Pioneer DED P3800MP. The materials required are:
- Wire cutters
Flat Head Screwdriver
- The first step to installing your new Pioneer DED P3800MP is to grab your materials and head over to your car. Lay out the materials on the passenger seat, back seat or on the center console. After you have done that, open your hood. Now, disconnect the battery.
- The second step to installing your new Pioneer DED P3800MP is to use your wedge and slowly wedge out your old radio. Make sure you remove any CDs from it before doing this. After you have done that, put your wedge aside and take your wire cutters. Now, cut the wire.
- The third step to installing your new Pioneer DED P3800MP is to connect the wires to your radio. After you have done that, carefully put your Pioneer radio into the slot. Make sure it is a snug fit. If it is not, you may need to get a kit to make sure your radio fits snugly. After all, you do not want your new radio coming out of the slot when you are driving on the road.
- The fourth and final step to installing your new Pioneer DED P3800MP is to reconnect the battery. After you have done that, turn on the radio to see if it is working. If the radio is not working, check your wiring. After you have done that, check the fuse. If the radio is still not working, then you have a defected unit.