It is not difficult to know how to install a remote control code to a television. In order to set a remote control you will need a code because it enables you to make sure you are setting up the television to the right remote. When you program your remote control to your television, you are able to control volume, change channels, access the menus and so much more. You will not be able to use the remote control for your television until you set the code. To install a remote control code to a television, you need to follow a few steps.
To install a remote control code to a television you will need:
- Remote control
- Television set
- Turn on your television. Make sure your television is powered on and ready to go.
- Press and hold down the "Code Search" button until the LED button lights up and begins to flash on the remote. Then release the code search button.
- Access the program code and then press the "TV" button on the remote control. You can get the code for your television from your TV manual. If you do not have access to the manual, you can do a search online with your television make and mode and the remote information to access the correct code.
- Enter the program code on your remote. The remote control code to your television begins to search for the correct programming.
- Your remote control LED light will flash a few times when the correct code has been selected. It is possible to find multiple codes for your television. If this is the case, go through each code and enter it on your remote until you find the correct one.
- Let the TV power off. When the remote turns off your TV that means you have installed the code to your television correctly. You are now able to turn on your television and operate it with the use of your remote control.