How To Install Speakers In A Ford Ranger

Why pay someone when you can learn how to install speakers in your Ford Ranger? It is a simple project although it maybe time consuming. All you need to get started is a few hours and these materials:

  • Cordless drill
  • Phillips screwdriver
  • Sockets
  • Torx bits (for removing window crank)
  • Female spade terminal
  • Wire crimpers
  • Wire Cutter
  1. The first step to installing speakers in your Ford Ranger is to remove the door panels to access the speakers easier. Now remove the factory speakers in your Ford Ranger. Cut the speaker wires with the wire cutter.
  2. The second step to installing speakers in your Ford Ranger is the easiest step installing the new speakers. Before screwing the new speakers in just connect the old wires to your new speakers just like how you would plug in your phone to the phone charger.  Once you have done turn the radio on to make sure the speakers work. If you are replacing all the speakers in your Ford Ranger test each speaker one at a time. 
  3. The third step is to put the panels back onto the door. Congratulations you have finished installing speakers in your Ford Ranger.


  • If you are also replacing the factory radio make sure the radio is the same size as the factory radio. If it is the same size, remove the factory radio and disconnect the wires. After you have done that just reconnect the wires to your new radio like you just did to your new speakers.
show comments

What Others Are Reading Right Now.