So you somehow manage to screw up the programming on your Jaguar keyless remote and now you need to know how to program the keyless remote in a Jaguar without having to pay some ridiculous fee at the dealership. Well, you have found the right article. Reprogramming the keyless remote for your Jaguar is simple to do. So print out this article and get started whenever you have about five minutes to spare in your busy day.
You will need:
The first step to programming your Jaguar keyless remote is to head over to your Jaguar. Open your driver side door and get in your car.
The second step to programming your Jaguar keyless remote is to turn the ignition switch to the auxiliary position. Turn the ignition switch to the on position then back to the auxiliary position. Repeat this four times. After you have repeated that four times you will hear a chime. If you do not hear a chime repeat this process. After three tries if you do not hear a chime, head over to your nearest dealership to get the batteries on your key replaced.
The third and final step to programming your Jaguar keyless remote is to turn the ignition switch to the off position and remove your key. Hold any key for ten seconds and you will hear another chime. Once again if you do not hear a chime, repeat step three. Congratulations, you now know how to program your Jaguar keyless remote.