Learning how to remove a stereo from your 1999 Chevy Silverado is easy to do. Why pay someone else to remove the stereo from your 1999 Chevy Silverado? You can spend that money on someone special in your life or just save it for a rainy day. Before you get started you are going to need some materials.
- Phillips screwdriver
- Flathead screwdriver
- Wire cutter
The first step to removing the stereo from your 1999 Chevy Silverado is to open up your hood and disconnect your battery. Make sure you unlock your car first since your car will not unlock by remote if your battery is disconnected.
The second step to removing the stereo from your 1999 Chevy Silverado is to stick the Flathead screwdriver in between the stereo and cracks to pry the stereo out. You will need to use your Phillips screwdriver to unscrew the screws on the stereo. After you have done that and pry the stereo out a little, you can use your hand to pull the stereo out. Do not pull out the stereo too fast or you will rip the wires.
The third and final step to removing the stereo from your 1999 Chevy Silverado is to cut the wires to the stereo. After you have done that, just connect the wires to your stereo and push it into the slot. Make sure the stereo is the same size. Congratulations, you now know how to remove the stereo from your 1999 Chevy Silverado.
Fuzzy dice might be nice, but they don’t count as a dire necessity that you should have in your car. Five other items do ...
Mechanics will murder you with $75 an hour for labor plus costs for who-knows-what. They should hand you a Rosetta Stone ...
By Nathan Adlen Remember when cars of the future looked like they could travel over 300 mph, pour you an espresso and ...