How To Replace Belts On A Kenwood Cassette Deck Player

It is not very hard to learn how to replace belts on a Kenwood cassette deck player. You need to order a replacement belt, so make sure you find the model number of your Kenwood cassette deck. Once you receive your order, to replace belts on a Kenwood cassette deck player put the unit on a table that is free of clutter, so you do not lose any of the screws that hold it together.

Things You May Need:

  • Screwdriver
  • Scissors
  • Replacement belt
  1. Unplug the Kenwood from the outlet. When you replace belts on a Kenwood cassette deck player, or do any other work inside the unit, always disconnect it from a power source. Once you unplug the unit, unscrew the cover and place the screws in a safe area so you do not lose them.  
  2. Find the old belt inside the Kenwood cassette. Make a note of how the belt is attached inside of the unit, so you know how to put on the new belt. You may even want to take some video of the inside of the unit so you can refer back to it if necessary. If you cannot remove the old belt by stretching it, cut it with a pair of scissors. Be careful not to damage the unit when you replace belts on a Kenwood cassette deck player.
  3. Attach the new belt to the unit. Stretch it into place the exact same way the old belt was attached. Take your time when you replace belts on a Kenwood cassette deck player so you can attach the new belt correctly.
  4. Before you put the cover of the unit back on, see if the new belt works properly. When you replace belts on a Kenwood cassette deck player, plug it back into the power source and then pop in a cassette. If the unit works properly, screw the cover back on and discard the old belt.
show comments

What Others Are Reading Right Now.