How To Salvage Motorcycles

At some point, every motorcycle rider is bit by the how to salvage motorcycles bug. To salvage motorcycles, like all restoration jobs needs good mechanical knowledge, time, patience and spending.  To salvage motorcycles, the following is required: a garage, camera, Internet access, old photographs or publications.

  1. Find pictures of how the motorcycle to be salvaged looked like originally. You might have to go on the Internet or look through old photographs or magazines to complete this task.  Also, join a motorcycle enthusiast club where you can find useful information or old parts for how to salvage the motorcycles. Then draw up a salvaging schedule and stick to it.
  2. Take good photographs of the motorcycle as it is before salvaging.  Strip the motorcycle to its frame in a garage or other place that is dry and where the motorcycle will not be disturbed, noting all the parts that need repair or replacement. A good sitting bench, strong vice, access to electricity for lighting and labelled part bins are necessary.  Also, make note of all the parts that are missing.  It is important to replace damaged parts with original parts and not parts that are ‘close. ’  Do not buy a collection of old parts to build up into a motorcycle; these are usually rejects from failed motorcycles salvages.
  3. Start with the frame.  Sandblast, primer and paint it in its original color.  Do the same to the tank and fenders.  Use professionals to do this if you are not qualified to carry out this portion of how to salvage motorcycles.
  4. Disassemble the motorcycle engine and inspect its parts.  Strip the engine and rebuild it. A missing spark plug, for instance, may mean seized pistons.
  5. Check the carburetor. The carburetor suffers the most wear and tear and it is crucial to see if it requires replacement.  To salvage motorcycles, remember to replace parts exactly as they are supposed to be.
  6. Assemble the parts. Put the original and replaced parts back together making sure that the muffler system is solidly mounted and that there are no air leaks.  Store the salvaged motorcycle in a warm and dry place, cleaning it every time it is taken out.  Special attention needs to be paid to the battery and fuel stabilized as the salvaged motorcycles will not be ridden often.   
show comments

What Others Are Reading Right Now.