How To Set Up Car Stereo In A Jaguar
People that need to learn how to set up a car stereo in a Jaguar car need not worry about the prestige of the car. Jaguar spare parts are expensive but the installation process is manageable.
- Drills or power drill
- Visual protector
- Car manual
- The vehicle needs to be parked on a level surface so the operative can work easily. The car must be in the first gear so there is enough clearance to start working with the radio. The environmental knobs have to be removed by pulling them. Make sure the knobs are in position as they can be hard to replace if they are mixed up. Remove the nuts behind the knobs using the flat-bladed screwdriver. Make sure the trim is also removed.
- Check the power harness using the conductors. This when the operative starts the wiring. There are the red versions and the yellow versions. The worker needs to crimp the male bullet to the antenna connector using a harness. The female bullet can then be placed in the remaining slots. Make sure the right harness is used to avoid a power failure.
- Check the mounting frame for the stereo. The operative can use the old stereo to see what the arrangement looked like before they put the new system in place. Mark the points where the worker needs to make the drills for the entry of the new radio system. The oversized holes can help the worker obtain the right leeway for the operation.
- Reattach the trim piece to face the old radio and insert it into the cage that comes with the car. Make sure you mirror the position of the old stereo as the operative places the new one in. The user might need to work within the cage in order to get the results he wants. In general terms, this should not be a problem as long as the worker uses the old placement as the marker for the new stereo.
- Affix the wires through the mesh until all the connecting plugs have been completed with the stereo. If the user has bought the exact replica of the object, the radio will be relatively easy to install. The plugs on the new Jaguar tend to follow a set pattern so they do not have to do many adjustments.
- As the operative places the old rim back and assembles the radio, he needs to ensure the wires are not sticking out and no plugs are left hanging. This might impede the stereo's action at a later stage and will certainly cause some problems on the next installation.
Posted on: Sep. 21, 2010