How To Wire Car Stereo
Why not save some money in this tough economy and learn how to wire your car stereo yourself? It's simple to do all you need is an afternoon to yourself. If possible when wiring your car stereo have your car inside a garage. Since you will be spending a few hours in your car you want to stay as cool as possible and having your car in your garage allows you to do so.
Now before you get started you are going to need these materials:
- Guide to remove the dash and speaker panels in your car
- wire cutters
- wire strippers
- screw driver
- The first step to wiring your car stereo is to open your hood and disconnect the battery. After you have done that, it is time to install your speakers. This can be done by removing the panel of the speaker enclosure.
The second step to wiring your car stereo is to unscrew and disconnect the speaker. Before you connect the new speakers, splice the old wires then connect them to your new speaker. After you have done that screw your speaker in.
- The third and step to wiring your car stereo is to screw the panel back on. After you have done that, take out your existing head unit. Now disconnect your head unit and splice the old wires. Now connect your new head unit. After you are done, put your new head unit in your car's dash. Congratulations you now know how to wire your car stereo.